Shaft Encoders
R20, R20-P, RG, RJ, RL, RL-P, RS, RS-P Series Shaft encoders are intended for direct coupling to a device shaft, and generate a specific pulse output for each revolution of the device shaft....
Series 20 with Heavy Duty Bearings
The model R20 is an optical shaft encoder in a 2" diameter x 1-3/4" long housing that can be face mounted using three 6-32 x .25" deep mounting holes on a 1.75" diameter bolt circle. The shaft is up to 3/8" diameter, either single or double ended. Electrical connection is through a 16mm circular connector or an attached cable.
Standard Features and Options:
- 3/8" diameter shaft
- Unbreakable code disk
- Up to 1200 pulses per revolution
- Attached cable or optional connector
- Heavy Duty bearings
- Short circuit and ESD protected
Popular Models:
R20CQ-500/5 M187
R20CQ-500/8-30CS
R20M8-200/5-26
R20Q-1200/5-26DGS RC
R20Q-512/24P
R20Q-512/8-30DL M222B
Series 20-P with Heavy Duty Bearings
The model R20-P is an optical shaft encoder in a 2" diameter x 1-3/4" long housing that can be face mounted using three 6-32 x .25" deep mounting holes on a 1.75" diameter bolt circle. The shaft is up to 3/8" diameter, either single or double ended. Electrical connection is through a 16mm circular connector or an attached cable.
The encoder is factory configured with a program that offers one or more features. DIP switches are used to set program parameters. Examples of some of the available features are: selectable pulses per revolution, quadrature (A/B) outputs, direction output, and the anti-jitter feature.
Standard Features and Options:
- DIP switch sleectable features
- Up to 3/8" shaft diameter, option double ended
- Heavy Duty bearings
- Unbreakable code disk
- Size 20 housing
- Short circuit and ESD protected
- Up to 1200 pulses per revolution
- Attached cable, or 16mm or M12 connector
Popular Models:
R20-P64AJ/8-30S
RG - General Purpose and Economical
A 2.25" diameter incremental encoder with three 6-32 x .25" deep mounting holes on a 1.75" diameter bolt circle. The enclosure is 1.75" long when equipped with an attached 10 ft. (3 meter) cable, or 3" long with a connector.
Standard Features and Options:
- Short-Circuit and ESD protection are available on allm odesl with the anti-jitter option, and many other (please inquire)
- Surge protection available
- CE Marked (specific models only and requires end or side connector)
- 10-foot / 3-meter attached cable is included at no extra charge.
Popular Models:
RGA-2400/24NP
RGA-600/12
RGA-600/5
RGAQ-10/12 M49
RGB-1200/24
RGB-240/8-30CE
RGBQ-240/24CE
RGBQZ-1200/8-30E
RGBQZ-360/24P
General Purpose and Environmentally Sealed
A 2.25" diameter incremental encoder with three 6-32 x .25" deep mounting holes on a 1.75" diameter bolt circle. The enclosure is 3" long with a side connector or end connector. Many modified versions match ECCI encoders.
See the RG encoder for an economical version that is not environmentally sealed.
Standard Features and Options
Popular Models:
RJB-3AJ/24P
RJBQ-120/12 M76
RJBQ-300/5 M76
RJBZ-2400/8-30NP
RJM8QZ-500/8-30NP M247S
RJQ-100/5 M125
RJQ-250/5 M125
RJQ-600/5 M125
RJQNZ-500/5 M92
RL General Purpose and Heavy Duty
The model RL rotary shaft encoder comes with a 3/8", 1/2", 5/8", 8mm, 10mm, or 3/8-16 or 1/4-20 threaded shaft for heavy duty applications where a face mounted encoder is required. The rugged 3" diameter by 2-3/8" deep enclosure is constructed of 1/4" thick aluminum with a 5, 6, or 10 pin connector on the side.
Metric bolt holes are available - see M96 and M105 modifications below.
***Optional modification number (see modified versions table below)
***For other accessory options, see the accessories table below
Notes: * 120AC supply voltage and Triac output require the 3/8" single or double ended shaft.
Note: Not all features are listed. Some combinations are mutually exclusive.
Standard Features and Options
- Shaft: 3/8" x 1.25" length, single or double ended. 1/2" x 1.25" length. 5/8" x 1.25" length. 8mm x 32mm. 10mm x 32mm.
- Short-Circuit, ESD, and Surge protection are available
- CE Marked (specific models only)
RL-P Programmable Heavy Duty Shaft Encoder
The RL-P rotary shaft encoder directly couples to a rotating shaft and produces a specified number of square wave output pulses per revolution of the shaft. The number of pulses per revolution is determined by setting configuration switches accessible through an access port near the connector. Any one of a predefined set of pulses per revolution are available.
It comes with a 3/8", 1/2", 5/8", 8mm, 10mm, or 3/8-16 or 1/4-20 threaded shaft for heavy duty applications where a face mounted encoder is required. The rugged 3" diameter by 2-3/8" deep enclosure is constructed of 1/4" thick aluminum with a 5 or 6 pin connector on the side.
Metric bolt holes are available - see M96 and M105 modifications.
Standard Features and Options:
- Heavy duty bearings
- 3/8", 1/2", 5/8", Metric Shaft Diameters
- Double ended 3/8" shaft option
- Hollow shaft available - Model HRL-P
- Use DIP switches to configure options at installation time
- User selectable pulses per revolution
- User selectable output circuit
- Exclusive "Anti-Jitter" option
- Short-circuit and ESD protection
- 5 vdc, or 8 to 30 vdc supply voltages
- 1, 2, and 3 output models available
- Fully interchangeable with model RL
Popular Models:
RL-P240AJ/8-30
RL-P270AJB/8-30
RL-P64AJ/8-30
RS Standard 2-1/4" Cube Style Encoder
A 2-1/4" cube incremental encoder with four 6-32 x 1/4" deep mounting holes on a 2" diameter bolt circle located on both ends and the bottom. The enclosure is constructed of 1/8" minimum thick aluminum with a connector and single or double ended shaft. This model is compatible with most cube style encoders on the market.
It is available with 1/4", 5/16", 3/8", or 1/2" shaft diameters. Heavy duty bearings are available with up to 3/8" single ended shaft (see M182 option).
Standard Features and Options:
- 1/4", 5/16", 3/8", and 1/2" Shaft Diameters
- Double ended shaft option
- Hollow Shaft Available (see model HRS)
- Programmable model availabe (see model RS-P)
- Exclusive "Anti-Jitter" circuit for conveyor applications
- Single (A), Quadrature (A,B) and Index (Z) outputs
- Dual or Triple output Models with different pulses per revolution on each output (A, B, C)
- Short ciruit / ESD protection on most models.
- Custom Model Available
Popular Models:
RS.5-500/8-30 M166
RS.5Q-500/8-30 M166
RSAQ-100/10/15C
RSB-100/5 M122
RSB-10AJ/8-30P
RSB-12/8-30P
RSB-1200/8-30
RSB-2400/5
RSB-3/6/8-30 M88
RSB-5/10/8-30 M88
RSB-5AJ/24P
RSB-6AJ/8-30
RSBD-235/12R
RSBD-300/12R
RSBD-80/12R
RSBDQ-100/8-30
RSBDQ-250/5 M122
RSBQ-100/8-30
RSBQ-100/8-30P
RSBQ-1000/8-30
RSBQ-1200/8-30DL
RSBQ-30/8-30
RSBQ-512/8-30
RSC-10/8-30C M214
RSC-100/8-30C M214
RSC-60/8-30 M143
RS-P User Selectable Pulses per Revolution in a Standard Cube Style
The model RS-P is an optical shaft encoder in a standard 2¼” cube shaped housing that is electrically and physically interchangeable with most cube style encoders on the market. The number of pulses per revolution is determined by setting configuration switches accessible through an access port near the connector. Any one of a predefined set of pulses per revolution are available.
Standard Features and Options
Popular Models:
RSBD-P64Q/8-30 M172
RSB-P.125A/8-30
RSB-P.125AJ/8-30
RSB-P240AJ/8-30
RSB-P64AJ/8-305
RSB-P64AJ/8-30C
RSB-P64AJ/8-30G
粤公网安备 44060402001667号
